Kold-Draft GT560 Ice Machine
Maintenance and cleaning reference for the Kold-Draft GT560. 560 lbs/day full cube ice production capacity. Submit a request for possible routing to an independent local provider, subject to provider acceptance. No response or service is guaranteed.
Quick Specs
Kold-Draft GT560 Technical Specifications
| Specification | Value |
|---|---|
| Model Number | GT560 |
| Brand | Kold-Draft |
| Series | GT |
| Daily Ice Production | 560 lbs/day |
| Ice Type | full cube |
| Cooling System | air-cooled |
| Voltage | 208-230V |
| Machine Type | modular |
| Dimensions (W×D×H) | 24"W x 26"D x 26"H |
| Cleaning Difficulty | complex |
Key Features
Kold-Draft GT560 Maintenance Reference
All care and service intervals, procedures, and part numbers must follow the current Kold-Draft service manual for the GT560. The categories below are a general reference only — the manual is authoritative for timing and procedure.
External Care (Facility Staff)
Routine external care authorized for facility staff at the interval and procedure specified in the manufacturer service manual.
- Wipe exterior surfaces with approved sanitizer
- Check ice quality for clarity and odor
- Verify bin door seals properly
- Empty and sanitize ice scoop
- Inspect water inlet filter for debris
- Check for unusual sounds during operation
- Verify ice production rate is normal
- Clean exterior condenser (if accessible)
- Clean and sanitize storage bin interior
- Visual inspection of condenser coils
- Check water lines for leaks or buildup
- Inspect door gaskets and hinges
Qualified Service (Technician)
Internal, refrigerant, electrical, plumbing, and control-board work — performed by a qualified technician at the interval and procedure specified in the manufacturer service manual.
- Deep cleaning and sanitization
- Full descaling of evaporator and water system
- Condenser coil deep cleaning
- Water filter replacement
- Component inspection and adjustment
- Complete system inspection
- Refrigerant system check (EPA-certified technician required)
- Control board diagnostic
- Full operational check
- Maintenance log and service documentation update
Common GT560 Issues
GT560 FAQ
What is the daily production of the Kold-Draft GT560?
The Kold-Draft GT560 has a daily ice production capacity of 560 lbs per day. It produces full cube ice and utilizes an air-cooled cooling system.
How often should I clean a Kold-Draft GT560?
Cleaning intervals for the Kold-Draft GT560 depend on usage, water quality, and environment, and are set by the current Kold-Draft service manual for the GT560. Routine external care and periodic bin sanitization are recommended between qualified-service visits. Always confirm the recommended interval and procedure in the manual.
What does Kold-Draft GT560 maintenance cost?
Pricing varies based on the machine's condition and service scope. Submit a service request for possible routing to an independent local provider, subject to provider acceptance. No response or service is guaranteed.
What are common problems with the Kold-Draft GT560?
Common issues reported with the Kold-Draft GT560 include: cube ejection issues, evaporator cleaning critical, water pump demands. Consult the manufacturer service manual for model-specific guidance.
Request GT560 Service
Kold-Draft GT560 cleaning requests in Houston may be routed to an independent local provider, subject to provider acceptance. No response or service is guaranteed. Submit a request for more information.