Follett Horizon HCC1000A Ice Machine
Maintenance and cleaning reference for the Follett HCC1000A. 1000 lbs/day chewable ice production capacity. Submit a request for possible routing to an independent local provider, subject to provider acceptance. No response or service is guaranteed.
Quick Specs
Follett Horizon HCC1000A Technical Specifications
| Specification | Value |
|---|---|
| Model Number | HCC1000A |
| Brand | Follett |
| Series | Horizon |
| Daily Ice Production | 1000 lbs/day |
| Ice Type | chewable |
| Cooling System | air-cooled |
| Voltage | 208-230V |
| Machine Type | modular |
| Dimensions (W×D×H) | 30"W x 32"D x 27"H |
| Cleaning Difficulty | complex |
Key Features
Follett Horizon HCC1000A Maintenance Reference
All care and service intervals, procedures, and part numbers must follow the current Follett service manual for the HCC1000A. The categories below are a general reference only — the manual is authoritative for timing and procedure.
External Care (Facility Staff)
Routine external care authorized for facility staff at the interval and procedure specified in the manufacturer service manual.
- Wipe exterior surfaces with approved sanitizer
- Check ice quality for clarity and odor
- Verify bin door seals properly
- Empty and sanitize ice scoop
- Inspect water inlet filter for debris
- Check for unusual sounds during operation
- Verify ice production rate is normal
- Clean exterior condenser (if accessible)
- Clean and sanitize storage bin interior
- Inspect condenser coils and clean if accessible
- Check water lines for leaks or buildup
- Inspect door gaskets and hinges
Qualified Service (Technician)
Internal, refrigerant, electrical, plumbing, and control-board work — performed by a qualified technician at the interval and procedure specified in the manufacturer service manual.
- Deep cleaning and sanitization
- Full descaling of evaporator and water system
- Condenser coil deep cleaning
- Water filter replacement
- Component inspection and adjustment
- Complete system inspection
- Refrigerant system check (EPA-certified technician required)
- Control board diagnostic
- Full operational check
- Maintenance log and service documentation update
Common HCC1000A Issues
HCC1000A FAQ
What is the daily production of the Follett Horizon HCC1000A?
The Follett Horizon HCC1000A has a daily ice production capacity of 1000 lbs per day. It produces chewable ice and utilizes an air-cooled cooling system.
How often should I clean a Follett Horizon HCC1000A?
Cleaning intervals for the Follett Horizon HCC1000A depend on usage, water quality, and environment, and are set by the current Follett service manual for the HCC1000A. Routine external care and periodic bin sanitization are recommended between qualified-service visits. Always confirm the recommended interval and procedure in the manual.
What does Follett Horizon HCC1000A maintenance cost?
Pricing varies based on the machine's condition and service scope. Submit a service request for possible routing to an independent local provider, subject to provider acceptance. No response or service is guaranteed.
What are common problems with the Follett Horizon HCC1000A?
Common issues reported with the Follett Horizon HCC1000A include: ice texture variation, sensor calibration, high volume cleaning needs. Consult the manufacturer service manual for model-specific guidance.
Request HCC1000A Service
Follett HCC1000A cleaning requests in Houston may be routed to an independent local provider, subject to provider acceptance. No response or service is guaranteed. Submit a request for more information.